Added "Factory Reset"

Software/Gravity/Gravity.ino

@@ -3,6 +3,7 @@
 #include <FlexiTimer2.h>
 #include <EEPROM.h>
 #include <U8g2lib.h>
+#include <avr/wdt.h>
 
 #define VERSION "0.9b"
 
@@ -141,7 +142,7 @@ const uint8_t velvetscreen[437] U8G2_FONT_SECTION("velvetscreen") =
 
 
 void setup() {
-  Serial.begin(9600);
+  //Serial.begin(9600);
 
   pinMode(ENC_BTN_PIN, INPUT_PULLUP);
   pinMode(START_STOP_BTN_PIN, INPUT_PULLUP);
@@ -153,78 +154,15 @@ void setup() {
     pinMode(outsPins[i], OUTPUT);
   }
 
-  //check last bit in eeprom to know if the correct settings were stored
+  loadState();
-  if (EEPROM.read(1023) == memCode) {
-    int addr = 0;
-    EEPROM.get(addr, bpm);
-    addr = addr + sizeof(bpm);
-    EEPROM.get(addr, bpmModulationChannel);
-    addr = addr + sizeof(bpmModulationChannel);
-    EEPROM.get(addr, bpmModulationRange);
-    addr = addr + sizeof(bpmModulationRange);
-    EEPROM.get(addr, masterClockMode);
-    addr = addr + sizeof(masterClockMode);
-    EEPROM.get(addr, channels);
-    addr = addr + sizeof(channels);
-    EEPROM.get(addr, seqA1);
-    addr = addr + sizeof(seqA1);
-    EEPROM.get(addr, seqA2);
-    addr = addr + sizeof(seqA2);
-    EEPROM.get(addr, seqA3);
-    addr = addr + sizeof(seqA3);
-    EEPROM.get(addr, seqA4);
-    addr = addr + sizeof(seqA4);
-    EEPROM.get(addr, seqA5);
-    addr = addr + sizeof(seqA5);
-    EEPROM.get(addr, seqA6);
-    addr = addr + sizeof(seqA6);
-    EEPROM.get(addr, seqA7);
-    addr = addr + sizeof(seqA7);
-    EEPROM.get(addr, seqA8);
-    addr = addr + sizeof(seqA8);
-    EEPROM.get(addr, seqB1);
-    addr = addr + sizeof(seqB1);
-    EEPROM.get(addr, seqB2);
-    addr = addr + sizeof(seqB2);
-    EEPROM.get(addr, seqB3);
-    addr = addr + sizeof(seqB3);
-    EEPROM.get(addr, seqB4);
-    addr = addr + sizeof(seqB4);
-    EEPROM.get(addr, seqB5);
-    addr = addr + sizeof(seqB5);
-    EEPROM.get(addr, seqB6);
-    addr = addr + sizeof(seqB6);
-    EEPROM.get(addr, seqB7);
-    addr = addr + sizeof(seqB7);
-    EEPROM.get(addr, seqB8);
-    addr = addr + sizeof(seqB8);
-    EEPROM.get(addr, CV1Calibration);
-    addr = addr + sizeof(CV1Calibration);
-    EEPROM.get(addr, CV2Calibration);
-    addr = addr + sizeof(CV2Calibration);
-    EEPROM.get(addr, rotateScreen);
-  } else {
-    //calibrateCVs();
-    saveState();
-    EEPROM.write(1023, memCode);
-  }
-
-  //calibrateCVs(); //Just for the testing
 
   u8g2.begin();
-
+  checkScreenRotation();
-  if (rotateScreen) {
-    u8g2.setDisplayRotation(U8G2_R0);
-  } else {
-    u8g2.setDisplayRotation(U8G2_R2);
-  }
-
   updateScreen();
+
   calculateCycles();
   calculateBPMTiming();
 
-  displayScreen = 0;
-
   FlexiTimer2::set(1, 1.0 / 1000, clock);  // 1.0/1000 = 1ms period. If other than 1ms calculateBPMTiming() might need tweaking
   FlexiTimer2::start();
 }
@@ -233,8 +171,6 @@ void loop() {
   checkInputs();
 }
 
-//void reset() { asm volatile ("jmp 0x7800"); }
-
 void clock() {
   if (isPlaying) {
 
@@ -514,7 +450,78 @@ void saveState() {
   EEPROM.put(addr, rotateScreen);
 }
 
+void loadState() {
+  //check last bit in eeprom to know if the correct settings were stored
+  if (EEPROM.read(1023) == memCode) {
+    int addr = 0;
+    EEPROM.get(addr, bpm);
+    addr = addr + sizeof(bpm);
+    EEPROM.get(addr, bpmModulationChannel);
+    addr = addr + sizeof(bpmModulationChannel);
+    EEPROM.get(addr, bpmModulationRange);
+    addr = addr + sizeof(bpmModulationRange);
+    EEPROM.get(addr, masterClockMode);
+    addr = addr + sizeof(masterClockMode);
+    EEPROM.get(addr, channels);
+    addr = addr + sizeof(channels);
+    EEPROM.get(addr, seqA1);
+    addr = addr + sizeof(seqA1);
+    EEPROM.get(addr, seqA2);
+    addr = addr + sizeof(seqA2);
+    EEPROM.get(addr, seqA3);
+    addr = addr + sizeof(seqA3);
+    EEPROM.get(addr, seqA4);
+    addr = addr + sizeof(seqA4);
+    EEPROM.get(addr, seqA5);
+    addr = addr + sizeof(seqA5);
+    EEPROM.get(addr, seqA6);
+    addr = addr + sizeof(seqA6);
+    EEPROM.get(addr, seqA7);
+    addr = addr + sizeof(seqA7);
+    EEPROM.get(addr, seqA8);
+    addr = addr + sizeof(seqA8);
+    EEPROM.get(addr, seqB1);
+    addr = addr + sizeof(seqB1);
+    EEPROM.get(addr, seqB2);
+    addr = addr + sizeof(seqB2);
+    EEPROM.get(addr, seqB3);
+    addr = addr + sizeof(seqB3);
+    EEPROM.get(addr, seqB4);
+    addr = addr + sizeof(seqB4);
+    EEPROM.get(addr, seqB5);
+    addr = addr + sizeof(seqB5);
+    EEPROM.get(addr, seqB6);
+    addr = addr + sizeof(seqB6);
+    EEPROM.get(addr, seqB7);
+    addr = addr + sizeof(seqB7);
+    EEPROM.get(addr, seqB8);
+    addr = addr + sizeof(seqB8);
+    EEPROM.get(addr, CV1Calibration);
+    addr = addr + sizeof(CV1Calibration);
+    EEPROM.get(addr, CV2Calibration);
+    addr = addr + sizeof(CV2Calibration);
+    EEPROM.get(addr, rotateScreen);
+  } else {
+    //calibrateCVs();
+    saveState();
+    EEPROM.write(1023, memCode);
+  }
+}
+
+void resetFunc() {
+  wdt_enable(WDTO_15MS); // 8 ms watchdog 
+  while(true); // infinite loop without feeding the dog, should reset in 8ms
+}
+
 void calibrateCVs() {
   CV1Calibration = 511 - analogRead(ANALOGUE_INPUT_1_PIN);
   CV2Calibration = 511 - analogRead(ANALOGUE_INPUT_2_PIN);
+}
+
+void checkScreenRotation() {
+  if (rotateScreen) {
+    u8g2.setDisplayRotation(U8G2_R0);
+  } else {
+    u8g2.setDisplayRotation(U8G2_R2);
+  }
 }

Software/Gravity/Interactions.ino

@@ -57,11 +57,12 @@ void checkInputs() {
       } else if (displayScreen == 2 && menuItem == 1) {
         rotateScreen = !rotateScreen;
         saveState();
-        setup();
+        checkScreenRotation();
+        //setup();
+        //resetFunc();
       } else if (displayScreen == 2 && menuItem == 2) {
         EEPROM.put(1023, memCode - 1);
-        //delay(500);
+        resetFunc();
-        //setup();
       }
       updateScreen();
     } else if (encReleasedTime - encPressedTime < 2000) {  // longer press (<2s) is for navigating back. longer than 2s presses are ignored