Preparing code for rev 2

software/GToE/GToE.ino

@@ -5,7 +5,7 @@
 #include <FlexiTimer2.h>
 #include <EEPROM.h>
 
-#define VERSION "0.1a"
+#define VERSION "REV2 PREP"
 
 #define SCREEN_ADDRESS 0x3C
 
@@ -15,6 +15,7 @@
 #define MINBPM 20
 #define SCREEN_TIMEOUT 300000 //Turn display off after 5 min
 
+///* Rev 1 Config
 #define ENC_BTN_PIN 14
 #define ENC_D1_PIN 17
 #define ENC_D2_PIN 4
@@ -25,6 +26,22 @@
 #define ANALOGUE_INPUT_2_PIN A1
 
 const int outsPins[6] = {6, 11, 7, 10, 8, 9};
+//*/
+
+/* Rev 2 Config
+#define ENC_BTN_PIN 14
+#define ENC_D1_PIN 17
+#define ENC_D2_PIN 4
+#define START_STOP_BTN_PIN 5
+#define SHIFT_BTN_PIN 12
+
+#define EXT_INPUT_PIN 2 //needs to be an interrupt pin
+#define ANALOGUE_INPUT_1_PIN A7
+#define ANALOGUE_INPUT_2_PIN A6
+
+const int outsPins[6] = {7, 8, 10, 6, 9, 11};
+*/
+
 
 const int clockModes[17] = {-24, -12, -8, -6, -4, -3, -2, 1, 2, 3, 4, 5, 6, 7, 8, 16, 32}; //positive - divide, negative - multiply, 0 - off
 
@@ -135,6 +152,7 @@ void setup() {
 
   //Splash screen
   display.clearDisplay();
+  //display.setRotation(2); //rotate display for rev 2
   display.drawBitmap(48, 18, splash_logo, 33, 39, 1);
   display.setCursor(90,1);
   display.setTextSize(1);

software/GToE/build/arduino.avr.nano/GToE.ino.eep

@@ -0,0 +1 @@
+:00000001FF